Metal Roofing in Orangevale, CA
- 4.8 from 490 Reviews
- Workmanship Warranty
- Financing Available
- Insurance Claim Help
Metal roofing comes in panels and shingles, and each style goes on a different way. The choice affects cost, cooling and fire protection. Homeowners also ask how long metal lasts and how it handles heat. Porter Roofing handles metal roofing in Orangevale, CA. This page explains the main types, what to ask and what goes into the job. Call (916) 526-3505 or ask for a free estimate.
What Makes Up a Metal Roof in Orangevale?
A metal roof in Orangevale is made of steel, aluminum or copper. The U.S. Department of Energy lists these as the most common roofing metals. The metal comes as shingles or as panels, and each goes on a different way. Layers under the metal, such as a sealed deck, drip edge and flashing, keep water out.
- Metal shingles. Pieces made to look like wood shakes or like concrete or clay tile.
- Exposed-fastener panels. Ribbed panels made in a factory and held down with color-matched screws that have gaskets.
- Standing-seam panels. Panels made on site that run from ridge to eave and attach with concealed fasteners.
- Layers underneath. A sealed deck, metal drip edge and flashing at vents, pipes and walls sit under and around the metal.
Is Metal Roofing Worth the Higher Cost?
The Department of Energy's Building America guide notes that metal costs more up front than asphalt shingles.
The same guide calls metal roofs durable, low in upkeep and repaintable. It says a metal roof can last for decades. It gives no test data for that, so treat it as a general claim.
Cost over time depends on how long you stay. If you plan to stay in your Orangevale home for years, the higher price may be easier to weigh.
Can a Metal Roof Keep Your Home Cooler?
Reflective coatings are available for metal roofing. The guide recommends cool roof products in hot climates. Read more in the DOE metal roof guide.
Orangevale summers bring long stretches of heat, so coating and color matter. A lighter, reflective finish may help keep the roof cooler.
Winter is different. When it is cold, or the roof cools overnight, moisture can condense under metal. Ask your roofer how the attic will be vented and what goes under the panels.
Want to compare metal options?
Which Metal Fits Your Home?
Steel, aluminum and copper are the most common metals. The table sets them side by side.
| Metal | Worth knowing |
|---|---|
| Steel | Common and made corrosion-resistant, and it takes galvanized fasteners |
| Aluminum | Common and corrosion-resistant |
| Copper | Common, and it needs copper-compatible fasteners |
Mixing different metals can cause corrosion, so screws and trim must match the panels. Standing water and debris raise the risk too. On a roof under Orangevale oaks, good drainage matters.
Plan Ahead Before You Sign
Ask the maker for its evaluation report. It lists the fire class, wind uplift and impact ratings for the product. Roof slope helps decide which form fits, so ask the roofer to check yours.
Metal is generally seen as a fire-resistant covering. It is rated Class A, B or C, and Class A gives the most protection. Metal often needs a noncombustible deck or fire-resistant underlayment to reach Class A.
Check with the building office about whether a permit is needed. Your Orangevale permit questions go to Sacramento County because the community is unincorporated. Ask the roofer for a written note naming who will obtain any needed permit.
How a Metal Roof Goes On
The order below follows the Department of Energy guide. Every Orangevale home is a little different.
- Fasten the deck
The roof deck is nailed down with code-approved fasteners.
- Seal the deck
A membrane or underlayment goes over the deck.
- Add drip edge
Metal drip edge goes along the eaves and the sloped edges.
- Flash the weak spots
Chimneys, vents, pipes and walls get flashing.
- Install the panels
Panels go on by the maker's instructions and the code, laid so water sheds outward.
- Finish and clean
Eave clips are set so water flows into the gutter, and the crew clears debris.
Ready to plan your metal roof?
What Changes the Cost of a Metal Roof?
No two metal roofs cost the same. Roof size and shape are the first things that affect cost. The form you choose also matters, since standing-seam panels are made on site.
The metal and its gauge change the total. Heavier gauge resists hail better than lighter gauge. Coatings, fasteners and flashing add to the price. Wood under the old roof may need repair first.
Steep slopes and tight access add set-up work. Porter Roofing can price a metal roof for a home near Hickory Avenue or anywhere else in Orangevale. Ask us about a metal roof for your home and get a free estimate. Financing available.
Check the Finished Metal Roof
After the crew finishes, walk around your home together with the roofer. Look up from the yard and ask about anything that seems off. After the first wet Orangevale storm, look again.
- Panels or shingles sit straight and lie flat.
- Screws are snug, not crushed and not crooked.
- Metal at chimneys, vents and walls sits tight with no gaps.
- Eave edges let water flow into the gutters.
- The roofer hands you the maker's evaluation report and your warranty papers.
- The ceiling and attic stay dry after rain.
Care for a Metal Roof in Orangevale
A metal roof needs little upkeep, but debris still matters. Oak leaves and twigs hold water in Orangevale gutters and valleys, and standing water raises the corrosion risk. Keep them clear.
Ask a tree service to check limbs hanging above the metal roof. Check the roof without climbing each spring, each fall and after a large storm. If you add a vent or a rack later, use parts that match the metal. If something looks off, call (916) 526-3505 or ask for a free estimate.
Metal Roof Questions in Orangevale
A metal roof's cost depends on the size and shape of the roof. The metal, its gauge and the panel form change the total. Coatings, fasteners, flashing and wood repair add to it. Metal costs more up front than asphalt shingles, according to a Department of Energy guide. A roofer must inspect your roof before putting a real cost on the job. Porter Roofing gives free estimates, and financing is available.
Metal roofing comes in three main forms. Metal shingles are made to look like wood shakes or tile. Exposed-fastener panels are ribbed and held down with gasketed screws. Standing-seam panels run from ridge to eave with hidden fasteners. Each form goes on a different way, so ask a roofer which one fits your home and your roof slope. Ask Porter Roofing for a free estimate.
Metal roofs are generally seen as fire-resistant coverings. They are rated Class A, B or C, and Class A offers the most protection. A Department of Energy guide says metal often needs a noncombustible deck or fire-resistant underlayment to reach Class A. Ask the maker for its evaluation report, and ask your roofer which class your Orangevale roof will carry.
A metal roof can keep a house cooler when it has a reflective coating. Reflective coatings are available, and a Department of Energy guide recommends cool roof products in hot climates. Orangevale summers are hot and dry, so color and finish are worth a look. Ask a roofer which options fit your home, and ask Porter Roofing for a free estimate.
Get Your Free Metal Roof Estimate in Orangevale
Share the look you have in mind for your metal roof. Use the form, or reach us at (916) 526-3505.